 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FFB3906 / FMB3906 / MMPQ3906 FFB3906 E2 B2 C1 FMB3906 C2 E1 C1 E1 MMPQ3906 E2 B2 E3 B3 E4 B4 B1 SC70-6 Mark: .2A pin #1 C2 B1 E1 pin #1 B1 B2 E2 C2 C1 C3 C2 C4 C4 C3 NOTE: The pinouts are symmetrical; pin 1 and pin 4 are interchangeable. Units inside the carrier can be of either orientation and will not affect the functionality of the device. SuperSOT-6 Mark: .2A SOIC-16 Mark: MMPQ3906 pin #1 C1 PNP Multi-Chip General Purpose Amplifier This device is designed for general purpose amplifier and switching applications at collector currents of 10 A to 100 mA. Sourced from Process 66. Absolute Maximum Ratings* Symbol VCEO VCBO VEBO IC TJ, Tstg Collector-Emitter Voltage Collector-Base Voltage Emitter-Base Voltage Collector Current - Continuous TA = 25C unless otherwise noted Parameter Value 40 40 5.0 200 -55 to +150 Units V V V mA C Operating and Storage Junction Temperature Range *These ratings are limiting values above which the serviceability of any semiconductor device may be impaired. NOTES: 1) These ratings are based on a maximum junction temperature of 150 degrees C. 2) These are steady state limits. The factory should be consulted on applications involving pulsed or low duty cycle operations. Thermal Characteristics Symbol PD RJA TA = 25C unless otherwise noted Characteristic Total Device Dissipation Derate above 25C Thermal Resistance, Junction to Ambient Effective 4 Die Each Die FFB3904 300 2.4 415 Max FMB3904 700 5.6 180 MMPQ3904 1,000 8.0 125 240 Units mW mW/C C/W C/W C/W 1998 Fairchild Semiconductor Corporation FFB3906 / FMB3906 / MMPQ3906 PNP Multi-Chip General Purpose Amplifier (continued) Electrical Characteristics Symbol Parameter TA = 25C unless otherwise noted Test Conditions Min Typ Max Units OFF CHARACTERISTICS V(BR)CEO V(BR)CBO V(BR)EBO IBL ICEX Collector-Emitter Breakdown Voltage* Collector-Base Breakdown Voltage Emitter-Base Breakdown Voltage Base Cutoff Current Collector Cutoff Current IC = 1.0 mA, IB = 0 IC = 10 A, IE = 0 IE = 10 A, IC = 0 VCE = 30 V, VBE = 3.0 V VCE = 30 V, VBE = 3.0 V 40 40 5.0 50 50 V V V nA nA ON CHARACTERISTICS hFE DC Current Gain * IC = 0.1 mA, VCE = 1.0 V IC = 1.0 mA, VCE = 1.0 V IC = 10 mA, VCE = 1.0 V IC = 50 mA, VCE = 1.0 V IC = 100 mA, VCE = 1.0 V IC = 10 mA, IB = 1.0 mA IC = 50 mA, IB = 5.0 mA IC = 10 mA, IB = 1.0 mA IC = 50 mA, IB = 5.0 mA 60 80 100 60 30 300 VCE(sat) VBE(sat) Collector-Emitter Saturation Voltage Base-Emitter Saturation Voltage 0.65 0.25 0.4 0.85 0.95 V V V V SMALL SIGNAL CHARACTERISTICS fT Cobo Cibo NF Current Gain - Bandwidth Product Output Capacitance Input Capacitance Noise Figure (except MMPQ3906) IC = 10 mA, VCE = 20 V, f = 100 MHz VCB = 5.0 V, IE = 0, f = 100 kHz VEB = 0.5 V, IC = 0, f = 100 kHz IC = 100 A, VCE = 5.0 V, RS =1.0k, f=10 Hz to 15.7 kHz 450 3.0 8.0 2.5 MHz pF pF dB SWITCHING CHARACTERISTICS td tr ts tf Delay Time Rise Time Storage Time Fall Time VCC = 3.0 V, VBE = 0.5 V, IC = 10 mA, IB1 = 1.0 mA VCC = 3.0 V, IC = 10mA IB1 = IB2 = 1.0 mA 15 20 110 40 ns ns ns ns *Pulse Test: Pulse Width 300 s, Duty Cycle 2.0% Spice Model PNP (Is=1.41f Xti=3 Eg=1.11 Vaf=18.7 Bf=180.7 Ne=1.5 Ise=0 Ikf=80m Xtb=1.5 Br=4.977 Nc=2 Isc=0 Ikr=0 Rc=2.5 Cjc=9.728p Mjc=.5776 Vjc=.75 Fc=.5 Cje=8.063p Mje=.3677 Vje=.75 Tr=33.42n Tf=179.3p Itf=.4 Vtf=4 Xtf=6 Rb=10) FFB3906 / FMB3906 / MMPQ3906 PNP Multi-Chip General Purpose Amplifier (continued) Typical Characteristics V CESAT - COLLECTOR EMITTER VOLTAGE (V) h FE - TYPICAL PULSED CURRENT GAIN Typical Pulsed Current Gain vs Collector Current 250 V CE = 1.0V 125 C Collector-Emitter Saturation Voltage vs Collector Current 0.3 0.25 0.2 0.15 0.1 125 C 25 C = 10 200 150 25 C 100 - 40 C 0.05 0 - 40 C 50 0.1 0.2 0.5 1 2 5 10 20 I C - COLLECTOR CURRENT (mA) 50 100 1 10 100 I C - COLLECTOR CURRENT (mA) 200 VBE(ON) - BASE EMITTER ON VOLTAGE (V) V BESAT - BASE EMITTER VOLTAGE (V) Base-Emitter Saturation Voltage vs Collector Current 1 0.8 25 C Base Emitter ON Voltage vs Collector Current 1 0.8 - 40 C = 10 - 40 C 0.6 0.4 0.2 0 125 C 0.6 0.4 0.2 0 0.1 25 C 125 C V CE = 1V 1 10 100 I C - COLLECTOR CURRENT (mA) 200 1 10 I C - COLLECTOR CURRENT (mA) 25 Collector-Cutoff Current vs Ambient Temperature I CBO - COLLECTOR CURRENT (nA) 100 V 10 CB Common-Base Open Circuit Input and Output Capacitance vs Reverse Bias Voltage 10 C obo = 25V CAPACITANCE (pF) 8 6 4 2 0 0.1 C ibo 1 0.1 0.01 25 50 75 100 TA - AMBIENT TEMPERATURE ( C) 125 1 REVERSE BIAS VOLTAGE (V) 10 FFB3906 / FMB3906 / MMPQ3906 PNP Multi-Chip General Purpose Amplifier (continued) Typical Characteristics (continued) Noise Figure vs Frequency 6 V CE = 5.0V NF - NOISE FIGURE (dB) 5 4 3 2 I C = 1.0 mA, R S = 200 I C = 100 A, R S = 200 Noise Figure vs Source Resistance 12 NF - NOISE FIGURE (dB) 10 8 6 4 I C = 100 A I C = 1.0 mA V CE = 5.0V f = 1.0 kHz 1 0 0.1 I C = 100 A, R S = 2.0 k 2 0 0.1 1 10 f - FREQUENCY (kHz) 100 1 10 R S - SOURCE RESISTANCE ( k ) 100 Switching Times vs Collector Current 500 ts Turn On and Turn Off Times vs Collector Current 500 t off Ic 10 t on 100 TIME (nS) 100 TIME (nS) t on I B1 = tf 10 I B1 = I B2 = Ic 10 tr 10 VBE(OFF) = 0.5V Ic t off I = I = B1 B2 10 td 1 1 10 I C - COLLECTOR CURRENT (mA) 100 1 1 10 I C - COLLECTOR CURRENT (mA) 100 Power Dissipation vs Ambient Temperature 1 PD - POWER DISSIPATION (W) SOIC-16 0.75 SOT-6 0.5 SC70-6 0.25 0 0 25 50 75 100 TEMPERATURE ( C) 125 150 FFB3906 / FMB3906 / MMPQ3906 PNP Multi-Chip General Purpose Amplifier (continued) Typical Characteristics (continued) _4 ) Voltage Feedback Ratio 100 h ie - INPUT IMPEDANCE (k ) 10 Input Impedance VCE = 10 V f = 1.0 kHz h re - VOLTAGE FEEDBACK RATIO (x10 10 1 1 0.1 1 I C - COLLECTOR CURRENT (mA) 10 0.1 0.1 1 I C - COLLECTOR CURRENT (mA) 10 Output Admittance h oe - OUTPUT ADMITTANCE ( mhos) 1000 V CE = 10 V f = 1.0 kHz h fe - CURRENT GAIN 1000 500 Current Gain V CE = 10 V f = 1.0 kHz 200 100 50 100 20 10 0.1 1 I C - COLLECTOR CURRENT (mA) 10 10 0.1 1 I C - COLLECTOR CURRENT (mA) 10 TRADEMARKS The following are registered and unregistered trademarks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACExTM CoolFETTM CROSSVOLTTM E2CMOSTM FACTTM FACT Quiet SeriesTM FAST(R) FASTrTM GTOTM HiSeCTM DISCLAIMER ISOPLANARTM MICROWIRETM POPTM PowerTrenchTM QSTM Quiet SeriesTM SuperSOTTM-3 SuperSOTTM-6 SuperSOTTM-8 TinyLogicTM UHCTM VCXTM FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or 2. A critical component is any component of a life support device or system whose failure to perform can systems which, (a) are intended for surgical implant into be reasonably expected to cause the failure of the life the body, or (b) support or sustain life, or (c) whose support device or system, or to affect its safety or failure to perform when properly used in accordance with instructions for use provided in the labeling, can be effectiveness. reasonably expected to result in significant injury to the user. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Advance Information Product Status Formative or In Design Definition This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. This datasheet contains preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Preliminary First Production No Identification Needed Full Production Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild semiconductor. The datasheet is printed for reference information only. |
Price & Availability of FFB3906
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |